A soft disposable contact lens electrode

Bridging a 40-year innovation gap with modern design and innovative engineering

RM Electrode®

Designed for comfort

The RM Electrode® was engineered to deliver enhanced comfort without compromising the effectiveness of ERG testing. Soft medical grade silicone allows for extended wear with minimal ocular irritation. 

With a focus on repeatability and reliability, it is designed to minimize motion and blink artifacts and maximize signal-to-noise ratio (SNR). Reducing variability in ERG testing can provide greater test accuracy, fewer retests, improved test time and overall patient comfort.

Designed for performance and convenience, it is plug-and-play and compatible with most ERG systems.

Soft

Made of soft medical grade silicone for comfort and safety.

Double Base Curve:

Conforms to the cornea and sclera to provide high positional stability.

Recessed Electrode:

Recessed gold-plated electrode creates a thick tear film layer between the metal and cornea making indirect electrical contact and reducing motion and blink artifact.

Integral speculum:

Comfortably retracts the eyelids for consistent pupil exposure.

Light adapted ERG responses

RM Electrode® performance

Light-adapted 3.0 ERG (single-flash cone response): ERG waveforms recorded with the RM Electrode® (black trace in all panels) and the ERG-Jet Electrode (orange), Burian-Allen electrode (purple) and DTL-Plus electrode (green). Note: The 28% reduction in ERG amplitude for the DTL response is consistent with previously reported values (Michael P. Hennessy & Vaegan, 1995, L. Esakowitz, A kriss, F, Shawkat, 1993). Each waveform is the average of 30 responses. All recording electrodes (RM, Jet, BA and DTL) were referenced to a gold cup electrode on the forehead.

Ocular irritation over 60-minute of wear time

RM Electrode® comfort

Limbal redness over 60 minutes total wear time: Limbal redness observed at 20 min intervals, 60 minutes total wear time across three study groups. Study participants (n=10 per study group) wore one electrode in each eye. Grading score indicates: 0 (Normal), 1 (Trace), 2 (Mild), 3 (Moderate), 4 (Severe).

Corneal staining after 60 minutes total wear time: Study participants (n=10 per study group) wore one electrode in each eye. Corneal staining was evaluated at time 0 and after 60 minutes of total across three study groups. Grading score indicates: 0 (Normal), 1 (Trace), 2 (Mild), 3 (Moderate), 4 (Severe).

FAQs

Is there a need for an another ERG Electrode?

The RM Electrode is the first soft, corneal contact lens electrode, offering greater comfort without compromising signal quality.

Is the RM Electrode FDA cleared?

Yes, the RM Electrode is FDA cleared. It is indicated for use in patients aged 12 years and above undergoing diagnostic full-field electroretinogram (ERG) recording procedures.

Is the RM Electrode available for sale outside of the United States?

No, the RM Electrode is currently not available for sale outside of the United States. Please contact us for further information.

What ERG test can I do with the RM Electrode?

The RM Electrode is cleared for full-field electroretinogram (ERG) recording procedures.

Can I reuse the RM Electrode?

No, the RM Electrode is a single-use disposable electrode. It must not be re-sterilized or re-used.

Is the RM Electrode shipped sterile?

Yes, the RM Electrode is shipped sterile.

Can I use the RM Electrode on children?

The RM Electrode is cleared for use in patients aged 12 years and over.

Is the RM Electrode compatible with my ERG system?

The RM Electrode is compatible with most ERG systems. It has a 1.5 mm touch-proof connector making it plug-and-play, and per the labeling (IFU), complies with all applicable medical device safety standards, such as IEC 60601-1. Please contact us if the RM Electrode is not compatible with your ERG system.

Can I use my existing reference ranges if I switch to the RM Electrode?

Reference ranges obtained using the Burian Allen (unipolar) Electrode or the ERG-Jet can be used when recording with the RM Electrode. We are working to develop conversion factors for all other electrode types.

Is the RM Electrode suitable for my long research protocols?

The RM Electrode is not indicated to be used for more than one hour.

How do I install the RM Electrode?

Please refer to page 2 of the Instructions for Use for RM Electrode installation instructions. Installation video demonstrating the installation steps is coming soon!

Who should I reach out to if I have questions?

Please email us at admin@retmapinc.com or use the contact us page. A member of our team will get back to you within 24-48 hours.

Where can I find instructions for use?

Instructions for Use can be found here.

Do you have a canine version of the RM Electrode?

Yes, the RM Electrode Canine is available as a Single-Use and a Multi-Use. For information about the RM Electrode Canine, please reach out to us at admin@retmapinc.com. The RM Electrode Canine is available for purchase via our webstore.

Designed for greater comfort without compromising signal quality.